联系我们

保定市鑫鑫环保建材模具厂

电话:0312-8103011

手机:13403121185

联系人:吕经理

地址:保定东郊工业园区

新闻动态
连锁护坡模具介绍
连锁护坡模具介绍:在生产中影响连锁护坡模具品质,其重要的一项是连锁护坡模具的表面光洁度。连锁护坡模具在制作装配完成之后,是不能马上用于注塑生产的,在刚制作好的连锁护坡模具型芯上有大量的刀纹和毛刺,如果直接用于生产,将导致连锁护坡模具难以拖模,并且对连锁护坡模具的表面光洁度也造成影响。对于使用生产连锁护坡模具的塑料模具而言,它对于表面的光洁度的要求是非常的高的。而影响它的关键在于注塑模具的抛光工作。因此在连锁护坡模具生产中,我们必须会对这些模具进行抛光,从而使得其表面的光洁度达到工作的需求。现在一般使用的是人工使用抛光机对模具进行抛光,这种加工工艺比较受到工人资质的影响,一位不合格的工人很可能会对连锁护坡模具造成损害。比较安全的方法可以采用机械抛光,这种抛光方法消耗少,而且抛光的效果也比较均匀,光洁度高,但这类抛光在机械上需要要求,并不是每一个厂家都能用到。另外还有其他一些抛光方法,但由于经济和设备的制约,这些方式很难普及到连锁护坡模具生产中。
Chain slope protection mold introduction: in the production of chain slope protection mold quality, one of its important is the surface finish of chain slope protection mold. The chain slope protection mold can not be used for injection molding immediately after assembly. There are a lot of knife lines and burrs in the core of the newly made chain slope protection mold. If it is directly used for production, it will be difficult to pull the chain slope protection mold and affect the surface finish of the chain slope protection mold. For the plastic mold used to produce the chain slope protection mold, it requires very high surface finish. The key to it is the polishing of injection mold. Therefore, in the chain slope protection mold production, we must polish these molds, so that its surface finish to work. Now the general use of manual polishing machine mold polishing, this process is more affected by the qualifications of workers, an unqualified worker is likely to cause damage to the chain slope mold. Mechanical polishing can be used safely. This polishing method consumes less, and the polishing effect is more uniform, high gloss. But this kind of polishing needs mechanical requirements, not every manufacturer can use it. In addition, there are other polishing methods, but due to economic and equipment constraints, these methods are difficult to popularize to the chain slope mold production.

联系方式

  1. 名称:保定市鑫鑫环保建材模具厂
  2. 电话:0312-8103011
  3. 手机:13403121185
  4. 联系人:吕经理
  5. 地址:保定东郊工业园区

版权  保定市鑫鑫建材模具厂 网址:www.suolijc.com  推荐:流水槽模具,塑料护坡模具,路缘石模具,便道砖模具