联系我们

保定市鑫鑫环保建材模具厂

电话:0312-8103011

手机:13403121185

联系人:吕经理

地址:保定东郊工业园区

新闻动态
流水槽模具使用操作步骤
流水槽模具使用操作步骤如下:
The operation steps of the water trough mold are as follows:
靠前步:人工刷油或喷油(主要是为了做出来的水泥流水槽方便脱模,并且可以确保产品光滑美观完整)。
Step forward: brush or spray oil manually (mainly to make the cement flow tank easy demoulding, and to ensure that the product is smooth, beautiful and complete).
第二步:灌装混凝土(一般采用漏斗灌装,这样可以提高灌装效率,防止材料浪费)。
The second step: filling concrete (usually funnel filling, which can improve filling efficiency and prevent material waste).
第三步:混凝土震动(采用手提式振动棒进行插入式震动,可以使混凝土搅拌均匀)。
Step 3: Concrete vibration (the use of portable vibrating rod insertion vibration, can make concrete mixing uniform).
第四步:晾晒(室外生产一般在20摄氏度左右的成型时间为24小时)。
The fourth step: air drying (outdoor production is usually around 20 degrees Celsius molding time is 24 hours).
第五步:成品脱模(流水槽成品凝固好便可以顺利脱模,脱模一般采用人工或者吊车)。
Fifth step: the finished product demoulding (flume finished product solidification can be smoothly demoulding, demoulding generally using manual or crane).
第六步:成品养护(一般水泥制品脱模第二天要浇水养护,养护周期为7天,便可以出厂)。
Step 6: Maintenance of finished products (general cement products demoulding the next day to watering maintenance, maintenance cycle for 7 days, you can leave the factory).
第七步:成品安装(安装之前需要用开沟机把沟开好,再用吊车将水泥流水槽放入沟中即可)。
Step 7: Installation of finished products (before installation need to be ditched with a ditch opener, and then use a crane to put the cement flow tank into the ditch can be).

联系方式

  1. 名称:保定市鑫鑫环保建材模具厂
  2. 电话:0312-8103011
  3. 手机:13403121185
  4. 联系人:吕经理
  5. 地址:保定东郊工业园区

版权  保定市鑫鑫建材模具厂 网址:www.suolijc.com  推荐:流水槽模具,塑料护坡模具,路缘石模具,便道砖模具