联系我们

保定市鑫鑫环保建材模具厂

电话:0312-8103011

手机:13403121185

联系人:吕经理

地址:保定东郊工业园区

新闻动态
护坡塑料模具具备的四大条件
一、对成型制品的评价
1. Evaluation of molded products
①形状正确,尺寸精确,满足精度要求;②外观漂亮,色泽均匀,无任何缺陷,无明显合模线,④物理力学性能指标合格。
(1) the shape is correct, the size is accurate, and the precision meets the requirements; secondly, the appearance is beautiful, the color and lustre is uniform, there is no defect, there is no obvious closing line, and the physical and mechanical performance index is qualified.
二、对使用寿命的评价
Two. Evaluation of life span
①模具材料选择正确、优质,热处理符合设计要求;②易磨损部分表面光滑,硬度高,符合要求;③可达到或超过预算寿命,可满足循环使用要求。
(1) the selection of mould material is correct and high quality, and the heat treatment meets the design requirements; secondly, the surface of easily worn parts is smooth, the hardness is high, and it meets the requirements; 3. It can reach or exceed the budget life, and can meet the requirements of recycling.
三、对成型工艺的评价
Three. Evaluation of molding process
①对工艺条件控制要求不高,工艺参数有选择范围;②对物料适应性强;③易于脱模;④成型周期短。
(1) the control requirements for technological conditions are not high, the selection of technological parameters is limited; second, the adaptability to materials is strong; (3) easy to mold release; (4) the molding cycle is short.
四、对护坡砖模具的要求
Four. Requirements for the mold of the slope protection
①结构合理,外观整齐;②浇注系统凝料体积小;③型腔、型芯表面粗糙度及表面处理符合模具使用方要求。
(1) the structure is reasonable and the appearance is neat. 2. The volume of the gating system is small. 3. The surface roughness and surface treatment of the mold cavity and core are in line with the requirements of the die users.

联系方式

  1. 名称:保定市鑫鑫环保建材模具厂
  2. 电话:0312-8103011
  3. 手机:13403121185
  4. 联系人:吕经理
  5. 地址:保定东郊工业园区

版权  保定市鑫鑫建材模具厂 网址:www.suolijc.com  推荐:流水槽模具,塑料护坡模具,路缘石模具,便道砖模具